|
JERKY CANNON
Item#: 468
|
You asked for a heavy duty jerky maker with a large capacity - well, here it is - HOLDS 1-1/2 POUNDS
LEM's, the original Jerky Cannon. The Jerky Cannon barrel is made of anodized aluminum. The ends of the barrel are flared to allow for easy loading and insertion of the piston. The drive is heavy duty, with plastic coated steel handle,...
[read more]
|
|
JERKY CANNON DOUBLE NOZZLE
Item#: 468A
|
Add this double jerky nozzle to your Jerky Cannon and you can make twice as much jerky in the same amount of time. 2 slots 1 3/16" x 3/16". Double jerky nozzle is made of stainless steel.
[read more]
|
|
JERKY CANNON SAUSAGE NOZZLE
Item#: 468B
|
By adding this 3/4" stainless steel round sausage nozzle to the Jerky Cannon you can stuff sausage like a pro. Just slide the casings onto the nozzle and you can make all types of sausage delights.
[read more]
|
|
JERKY CANNON SNACK STICK REPLACEMENT NOZZLE 1/2"
Item#: 468C
|
Lost your round nozzle for your Cannon? Here's the replacement. This is the same round nozzle that comes with the Cannon.
[read more]
|
|
JERKY CANNON DOUBLE SNACK STICK NOZZLE
Item#: 468M
|
You can now make 2 snack stick strips at a time with the Jerky Cannon double snack stick nozzle. Tubes are made of stainless steel and are 1/2" in diameter.
[read more]
|
|
JERKY CANNON JERKY REPLACEMENT NOZZLE 1-3/16"
Item#: 468D
|
Lost your flat jerky nozzle for your Cannon? Here's the replacement. This is the same flat jerky nozzle that comes with the Cannon.
[read more]
|
|
JERKY CANNON 3/8" STUFFING TUBE - 6"
Item#: 468N
|
For those of you who prefer your snack sticks in a casing, now it's easier than ever. Use this stainless steel 3/8" Jerky Cannon stuffing tube on your Jerky Cannon to hold the casings. The 3/8" nozzle accepts 19mm to 21mm collagen casings or natural casings.
[read more]
|
|
JERKY CANNON & GUN BARREL STOMPER
Item#: 468P
|
We now have a tool to help you with filling your Jerky Gun and Jerky Cannon barrels. The Cannon & Gun barrel stomper will pack the meat firmly into the barrel while removing those unwanted air pockets. The stomper is 2" in diameter, with a 12" long handle.
[read more]
|
|
NYLON BARREL BRUSH
Item#: 468E
|
Having trouble getting the barrel of your Jerky Cannon clean? How about using our nylon barrel brush to help with the dirty work. This brush is long enough to go all the way through the aluminum barrel.
[read more]
|
|
JERKY CANNON EXTRA BARREL
Item#: 468G
|
For those of you who make a lot of jerky and want to load several Jerky Cannon barrels at one time, these extra barrels fill the bill. Each barrel holds 1-1/2 pounds of ground meat.
Buy 2 barrels for $19.98 and save $6.00
[read more]
|
Copyright © 2007 LEM Products