|
JERKY CANNON
Item#: 468
|
You asked for a heavy duty jerky maker with a large capacity - well, here it is - HOLDS 1-1/2 POUNDS
LEM's, the original Jerky Cannon. The Jerky Cannon barrel is made of anodized aluminum. The ends of the barrel are flared to allow for easy loading and insertion of the piston. The drive is heavy duty, with plastic coated steel han...
[read more]
|
|
JERKY GUN
Item#: 555
|
THE JERKY GUN HAS A LARGER CAPACITY THAN ANY OF OUR COMPETITORS
The one and only Jerky Gun from LEM Products. This item is made to give years of performance. The heavy duty drive system of the Jerky Gun handles ground meat like a charm. Load the barrel of the Jerky Gun with lean, seasoned ground meat and shoot out flat strips o...
[read more]
|
|
JERKY CANNON DOUBLE NOZZLE
Item#: 468A
|
Add this double jerky nozzle to your Jerky Cannon and you can make twice as much jerky in the same amount of time. 2 slots 1 3/16" x 3/16". Double jerky nozzle is made of stainless steel.
[read more]
|
|
JERKY CANNON SAUSAGE NOZZLE
Item#: 468B
|
By adding this 3/4" stainless steel round sausage nozzle to the Jerky Cannon you can stuff sausage like a pro. Just slide the casings onto the nozzle and you can make all types of sausage delights.
[read more]
|
|
JERKY CANNON DOUBLE SNACK STICK NOZZLE
Item#: 468M
|
You can now make 2 snack stick strips at a time with the Jerky Cannon double snack stick nozzle. Tubes are made of stainless steel and are 1/2" in diameter.
[read more]
|
|
JERKY CANNON/10LB DUAL GEAR STUFFER 3/8" s STUFFING TUBE - 6"
Item#: 468N
|
For those of you who prefer your snack sticks in a casing, now it's easier than ever. Use this stainless steel 3/8" Jerky Cannon/10LB Dual Gear Stuffer stuffing tube on your Jerky Cannon to hold the casings. The 3/8" nozzle accepts 19mm to 21mm collagen casings or natural casings.
[read more]
|
|
JERKY CANNON JERKY REPLACEMENT NOZZLE 1-3/16"
Item#: 468D
|
Lost your flat jerky nozzle for your Cannon? Here's the replacement. This is the same flat jerky nozzle that comes with the Cannon.
[read more]
|
|
JERKY CANNON EXTRA BARREL
Item#: 468G
|
For those of you who make a lot of jerky and want to load several Jerky Cannon barrels at one time, these extra barrels fill the bill. Each barrel holds 1-1/2 pounds of ground meat.
Buy 2 barrels for $20.00
[read more]
|
|
JERKY GUN EXTRA BARRELS- TWO PACK
Item#: 555A
|
For those of you who make a lot of jerky and want to load several Jerky Gun barrels at one time, these extra barrels fill the bill. After one barrel is empty, just put on a new barrel and keep shooting.
Two barrels for $14.99.
[read more]
|
|
NYLON BARREL BRUSH
Item#: 468E
|
Having trouble getting the barrel of your Jerky Cannon clean? How about using our nylon barrel brush to help with the dirty work. This brush is long enough to go all the way through the aluminum barrel.
[read more]
|
|
JERKY PAN & RACK- 18" x 13"
Item#: 407
|
Use this large jerky pan and rack combo to make jerky or sausage in your oven. The sturdy 18" X 13" jerky rack has feet which enables it to be stacked for drying several racks at one time. Stack them 2, 3, or 4 high. Improves circulation around the meat and speeds drying time. Rack is 1.5 square feet and holds approximately one pound of ground...
[read more]
|
|
JERKY RACK- 18" x 13"
Item#: 408
|
Extra racks for use with Jerky Pan and Rack can be stacked 2, 3, or 4 high. Rack is 1.5 square feet and holds approximately one pound of ground meat jerky strips.
[read more]
|
|
JERKY PAN AND 3 RACKS- 18" x 13"
Item#: I524
|
Use this large jerky pan and rack combo to make jerky or sausage in your oven. The sturdy 18" X 13" rack has feet which enables it to be stacked for drying several racks at one time. Improves circulation around the meat and speeds drying time. Rack is 1.5 square feet and holds approximately one pound of ground meat jerky strips.
[read more]
|
|
JERKY KNIFE & BOARD KIT
Item#: 616
|
SPECIAL PRICE SAVE $5.00 No more uneven strips of Jerky! With this jerky knife and board kit you can cut uniform strips of meat for even cooking and marinating. The board is made of hardwood. You will be able to cut meats, fruits and vegetables 1/4" or 3/8" thick. The 10" super sharp blade makes slicing a breeze. Includes a package of ...
[read more]
|
|
JERKY HANGER WITH 9 SKEWERS AND SEASONING- MAKES 2 LBS
Item#: 735
|
HOLDS OVER 100 JERKY STRIPS
Jerky strips are easy to make with the LEM Jerky Hanger. The strong stainless steel rack holds 9 stainless steel skewers. The rack sits conveniently inside an 18" x 13" aluminum pan to catch the drips. Situate the rack in the pan and place in your oven or smoker. The rack folds flat for easy storage inside...
[read more]
|
|
JERKY SLICER ATTACHMENT FOR GRINDER
Item#: 433J
|
The LEM Jerky Slicer Attachment slices meat up to 1 1/4" thick. 15 perfect jerky strips sliced and ready for the oven or dehydrator in seconds. Easily disassembles for clean up. Body is made of durable powder painted aluminum. No tools or assembly required. Chute Dimensions 1 1/4" x 4 1/2" x 8". Can easily be converted into a tenderizer by ...
[read more]
|
|
COMPLETE JERKY SLICER DRIVEN SHAFT
Item#: 433TJ-4A
|
This driven roller will turn your 433T into a Jerky Slicer. This roller is not intended to be used with the 433A tenderizer attachment. If you wish to turn the 433a tenderizer attachment into a jerky slicer you will need 433A-KIT.
[read more]
|
Copyright © 2007-2013 LEM Products Direct