|
PART- 25LB AND 50LB MIXER- MODEL #733 AND #734- SMALL DRIVE GEAR BUSHING
Item#: 733-19
|
Small drive gear bushing for the 25lb and 50lb mixers, model #733 and #734. There are two of these small drive gear bushings located on each mixer. One bushing is located in the gear box cover, and the other is located in the meat tank with the drive gear shaft, part #733-12 or #733-12a.
[read more]
|
|
PART- 25LB AND 50LB MIXER- MODEL #733 AND #734- LARGE DRIVE GEAR BUSHING
Item#: 733-20
|
Large drive gear bushing for the 25lb and 50lb mixers, model #733 and #734. There are two of these large drive gear bushings located on each mixer. One bushing is located in the gear box cover, and the other is located in the meat tank with the large gear, part #733-10.
[read more]
|
|
PART- 25LB AND 50LB MIXER- MODEL #733 AND #734- GEAR
Item#: 733-10
|
Gear for 25lb and 50lb mixer, model #733 and #734. This gear is located inside the gear box cover and is turned by the drive gear shaft, part #733-12 if mixer is slotted or #733-12a if mixer is splined.
[read more]
|
|
PART- 25LB AND 50LB MIXER- MODEL #733 AND #734- DRIVE GEAR SHAFT- SPLINED (3.5 INCH SHAFT)
Item#: 733-12A
|
Splined drive gear shaft for the 25lb and 50lb mixers, model #733 and #734. This shaft is 3.5" long and is located inside of the gear box cover. Shaft is turned either by the handle or by attaching the unit to a grinder. The shaft then turns the gear, part #733-10.
[read more]
|
|
PART- 25LB AND 50LB MIXER- MODEL #733 AND #734- HANDLE FOR SLOTTED SHAFT
Item#: 733-15
|
Handle for the 25lb or 50lb mixer, model #733 or #734. This handle is for a slotted drive shaft.
[read more]
|
|
PART- 25LB AND 50LB MIXER- MODEL #733 AND #734- HANDLE FOR SPLINED SHAFT
Item#: 733-15A
|
Handle for the 25lb or 50lb mixer, model #733 or #734. This handle is for a splined drive shaft.
[read more]
|
|
PART- 17LB/4.2 GALLON MIXER- RUBBER FEET
Item#: 654-9
|
Rubber feet for the 17lb, 4.2 gallon mixer, model #654. There are four feet that attach to the bottom of the meat tank.
[read more]
|