|
PART- #8 LEONARDI GRINDER- MODEL #535- HEAD/MAIN BODY
Item#: L0801
|
Grinder head for #8 .35hp electric grinder, model #535. This grinder head houses the auger, auger stud, knife, and plate.
[read more]
|
|
PART- #8 LEONARDI GRINDER- MODEL #535- REAR AUGER SHAFT
Item#: L0802
|
#8 REAR AUGER SHAFT
[read more]
|
|
PART- #8 LEONARDI GRINDER- MODEL #535- AUGER/SCREW FEEDER
Item#: L0804
|
Auger for #8 .35hp electric grinder, model #535. The auger is the corkscrew type piece that sits in the head of the grinder. It takes the meat from the throat of the meat pan and pushes it through the head to the knife and the plate.
[read more]
|
|
PART- #8 LEONARDI GRINDER- MODEL #535- SQUARE AUGER STUD (PRE 04)
Item#: L0805
|
Square auger stud for #8 .35hp electric grinder, model #535. This stud would be found on grinders that were manufactured prior to 2004. The auger stud screws into the auger and holds the knife and the plate.
[read more]
|
|
PART- #8 LEONARDI GRINDER- MODEL #535- SQUARE AUGER STUD (POST 04)
Item#: L0820
|
Square auger stud for #8 .35hp electric grinder, model #535. This stud would be found on grinders manufactured after 2004. There is a flange located behind the square part of the shaft. The auger stud screws into the auger and holds the knife and the plate.
[read more]
|
|
PART- #8 LEONARDI GRINDER- MODEL #535- RETAINING RING
Item#: L0808
|
Retaining ring for #8 .35hp electric grinder, model #535. This ring screws onto the front of the grinder head to hold in the knife, the plate, and the stuffing tube, if a stuffing tube is used.
[read more]
|
|
PART- #12 LEONARDI GRINDER- MODEL #535- HEAD/MAIN BODY
Item#: L1201
|
Grinder head for #12 .75hp electric grinder, model #536. This grinder head houses the auger, auger stud, knife, and plate.
[read more]
|
|
PART- #12, #22, & #32 LEONARDI GRINDER- MODEL #536, #538A, & #540- AUGER/SCREW FEED DRIVE
Item#: L1202
|
Auger/Screw feed drive for #12 .75hp, #22 1hp, and #32 1.5hp electric grinders, model #536, #538a, and #540. This drive fits into the back of the auger.
[read more]
|
|
PART- #12 LEONARDI GRINDER- MODEL #536- AUGER/SCREW FEEDER
Item#: L1204
|
Auger/Screw feeder for #12 .75hp electric grinder, model #536. The auger is the corkscrew type piece that sits in the head of the grinder. It takes the meat from the throat of the meat pan and pushes it through the head to the knife and the plate.
[read more]
|
|
PART- #12 LEONARDI GRINDER- MODEL #536- SQUARE AUGER STUD (PRE 04)
Item#: L1205
|
Square auger stud for #12 .75hp electric grinder, model #536. This stud would be found on grinders manufactured prior to 2004. The auger stud screws into the front of the auger and holds the knife and the plate.
[read more]
|
|
PART- #12 LEONARDI GRINDER- MODEL #536- SQUARE AUGER STUD (POST 04)
Item#: L1220
|
Square auger stud for #12 .75hp electric grinder, model #536. This stud would be found on grinders manufactured after 2004. There is a flange located on the stud behind the square part of the shaft. The auger stud screws into the front of the auger and holds the knife and the plate.
[read more]
|
|
PART- #12 LEONARDI GRINDER- MODEL #536- RETAINING RING
Item#: L1208
|
Retaining ring for #12 .75hp electric grinder, model #536. This ring screws onto the front of the grinder head to hold in the knife, the plate, and the stuffing tube, if a stuffing tube is used.
[read more]
|
|
PART- #8, #12, & #22 LEONARDI GRINDER- MODEL #535, #536, & #538A- STEP GEAR KIT
Item#: LSTEP
|
STEP GEAR KIT FOR #8, #12, #22
[read more]
|
|
PART- #22 LEONARDI GRINDER- MODEL #538A- HEAD/MAIN BODY
Item#: L2201
|
Grinder head for #22 1hp electric grinder, model #538a. This grinder head houses the auger, auger stud, knife, and plate.
[read more]
|
|
PART- #22 LEONARDI GRINDER- MODEL #538A- AUGER/SCREW FEEDER
Item#: L2204
|
Auger/Screw feeder for #22 1hp electric grinder, model #538a. The auger is the corkscrew type piece that sits in the head of the grinder. It takes the meat from the throat of the meat pan and pushes it through the head to the knife and the plate.
[read more]
|
|
PART- #22 LEONARDI GRINDER- MODEL #538A- SQUARE AUGER STUD
Item#: L2205
|
Square auger stud for #22 1hp electric grinder, model #538a. This stud screws into the front of the auger and holds the knife and the plate.
[read more]
|
|
PART- #32 LEONARDI GRINDER- MODEL #540- HEAD/MAIN BODY
Item#: L3201
|
Grinder head for #32 1.5hp electric grinder, model #540. This grinder head houses the auger, auger stud, knife, and plate.
[read more]
|
|
PART- #32 LEONARDI GRINDER- MODEL #540- AUGER/SCREW FEEDER
Item#: L3204
|
Auger/Screw feeder for #32 1.5hp electric grinder, model #540. The auger is the corkscrew type piece that sits in the head of the auger. It takes the meat from the throat of the meat pan and pushes it through the head to the knife and the plate.
[read more]
|
|
PART- #32 LEONARDI GRINDER- MODEL #540- SQUARE AUGER STUD
Item#: L3205
|
Square auger stud for #32 1.5hp electric grinder, model #540. This stud screws into the front of the auger and holds the knife and the plate.
[read more]
|
|
PART- #32 LEONARDI GRINDER- MODEL #540- RETAINING RING
Item#: L3208
|
Retaining ring for #32 1.5hp electric grinder, model #540. This ring screws onto the front of the grinder head to hold in the knife, the plate, and the stuffing tube, if a stuffing tube is used.
[read more]
|
|
PART- #32 LEONARDI GRINDER- MODEL #540- STEP GEAR (PLASTIC)
Item#: L61524I
|
#32 STEP GEAR (PLASTIC)
[read more]
|
|
PART- #32 LEONARDI GRINDER- MODEL #540- STEP GEAR KIT
Item#: LSTEP32
|
STEP GEAR KIT FOR #32
[read more]
|
Copyright © 2007 LEM Products